Trading from Kolkata
Your broker is probably in Singapore — but depending on which broker you use, you might be talking to London instead. Here's the real situation for Indian traders, and what you can do about it.
Kolkata is about 3,200 km from Singapore (16 ms of light-travel time) and about 7,800 km from London. Real-world latency lands at 65–120 ms to Singapore and 140–210 ms to London on consumer fibre. Which one matters depends entirely on which broker you trade with.
Where your broker actually lives
Indian traders split across two broker hubs, and your slippage depends on which side of that split you're on.
The Singapore side (typical RTT 65–120 ms) hosts IC Markets, Pepperstone, FP Markets, and Exness (APAC setup). The London side (typical RTT 140–210 ms) hosts XM, FXTM, HotForex, and the prop firms — FTMO, The Funded Trader, MyForexFunds, Topstep. A handful of regional brokers route through Dubai. TradersProxy has nodes in all three.
Open MT4 or MT5 and check the server hostname — something like ICMarkets-Live02 or XMUK-Real 18. The name usually tells you whether your broker runs on the Singapore or London side. A 60-second ping confirms it.
Why your real latency is worse than physics says
Indian residential ISPs — Jio Fiber, Airtel Xstream, BSNL, ACT Fibernet — route international traffic through a mix of submarine cables (SEA-ME-WE 5, IMEWE, BBG (Bay of Bengal Gateway)). The cable system matters because a packet to London can go east (through Singapore) or west (through the Middle East and Mediterranean) — and your ISP picks the cheaper path, not the shortest one.
Inside India and Pakistan, residential ISPs also route a surprising amount of traffic through Mumbai even if you're in Delhi or Bangalore. That domestic hop adds 5–15 ms before your packet even leaves the country. Real-world round-trip lands at 65–120 ms to Singapore and 140–210 ms to London for consumer fibre, with peak-hour spikes above 220 ms on bad days.
In trading terms, you feel it as:
- Slippage on XAUUSD, BTC, and major news events
- Requotes during the London session open
- Disconnects during NFP, CPI, and RBI/Fed announcements
- EA backtests that don't match live performance
A 100 Mbps Jio or Airtel line tests fast to an Indian server and tells you nothing about your path to London or Singapore. Round-trip time to your broker's MT hostname is the only number that matters.
What actually helps — in honest order
Four real options, in order from best-technical to cheapest.
1. VPS in Singapore or London (depending on your broker)
A $10–20/month VPS at Equinix SG1 (for Singapore-hosted brokers) or LD4 (for London-hosted brokers) drops you to sub-5 ms latency. Best fix for EAs and high-frequency strategies. The downside is RDP friction and knowing which hub to colocate near.
2. TradersProxy
You keep your own machine. Your trading traffic exits through our node closest to your broker — Singapore for SG-hosted brokers, London for prop firms. The session stays open between trades. The path doesn't depend on which cable your ISP's transit partner is using this quarter.
3. Change ISPs
Jio Fiber often outperforms Airtel Xstream on international routes, or vice versa, depending on transit contracts. A weekend trial is worth it if you've never tested. But it's not a permanent fix.
4. Do nothing
If you swing trade or hold positions for days, the latency gap doesn't matter. The real pain is for scalpers, news traders, and anyone running M1/M5 setups with tight stops.
For Indian traders, we're the option that works whether your broker is in Singapore or London — the same service, the right exit node.
We run nodes in Equinix SG1 and London (Iron Mountain LON1). You keep your own laptop and charts. See plans or read the argument first.
How to know your connection is the real problem
Before you pay for anything — VPS, proxy, or a new ISP — prove the diagnosis. Three tests, 15 minutes.
Test 1: ping the actual broker server
Don't ping google.com. Don't ping 8.8.8.8. Ping your broker's MT server hostname for 60 seconds. Note the min, average, and max. The spread between min and max matters more than the average — a short average with wide swings is worse for trading than a steady but slightly higher line.
Test 2: traceroute the path
Run tracert your-broker-hostname on Windows or traceroute your-broker-hostname on Mac. You'll see every hop on the path. If you see unexpected detours — traffic going the wrong direction, hops in unrelated countries — that's a routing problem at your ISP.
Test 3: run the tests at three different times
Morning local, during your main trading session, and during the overlap with the US session. If you get three different pictures, your path is variable — that's your ISP choosing different routes based on load.
TradersProxy uses a shared exit IP. That's fine for retail brokers. It's not always the right fit for prop firms. If you trade FTMO or The Funded Trader from Kolkata, check their policy first.
Kolkata-specific FAQ
If you trade MT4, MT5, or cTrader with a retail broker, your server almost certainly lives in Singapore. Major brokers serving Indian traders run their infrastructure at Equinix SG1 or similar Tier 1 facilities. The exceptions are prop firms like FTMO and The Funded Trader (usually London-based MT servers) and a handful of regional specialists. Open your MT platform and check the server hostname in the login window to confirm.
There is no permanent answer. Jio Fiber, Airtel Xstream, BSNL, and ACT Fibernet use different international transit providers, and those arrangements change every six to twelve months. Ping your broker's actual MT server hostname for 60 seconds on each ISP you're considering, and compare the min-max spread rather than the average. Jitter is what hurts your fills, not raw latency.
The 3,200 km distance from Kolkata to Singapore is about 16 ms of light-travel time, but residential ISPs rarely take the most direct path. Your packets often detour through regional transit points, which adds queueing delay and jitter. That's why real-world round-trip time from Kolkata typically lands at 65–120 ms rather than the theoretical minimum.
Technically yes - a VPS inside Equinix SG1 drops your latency to sub-5 ms because your terminal sits metres from your broker. But you trade via remote desktop, which adds friction, and you pay $10-20 extra per month. A proxy keeps your own machine and cleans the route, which is enough for most traders who aren't running high-frequency EAs.
5G often tests faster than fibre on speed tests, but speed tests measure throughput to local servers, not routing quality to your broker. Mobile networks also have more jitter than fixed-line connections. For scalping or news trading, stick to fibre. For swing or position trading, 5G is a reasonable backup.
Some prop firms, including parts of FTMO and The Funded Trader, prefer dedicated IPs and may flag shared exit addresses. TradersProxy uses a shared exit IP, which is fine for retail brokers but not always for prop firms. Check your prop firm's terms before you commit to any proxy service.
Open MT4 or MT5 and look at the server name in the login window, for example ICMarketsSC-Live04. Then ping that hostname from a command prompt for 60 seconds. The round-trip time tells you which region you're really hitting. A traceroute shows the exact path your packets take.