Skip to main content
Broker setup guide - Libertex

How to set up TradersProxy for Libertex

This page covers the Libertex-specific setup notes, the platform steps, and the server labels you are most likely to see. TradersProxy is broker-agnostic, so the connection logic is the same across brokers.

Use the broker portal for the exact server name. Use this page for the setup path and the routing notes.

Open portal Read the master setup guide

New here? See the plans

Quick answer

Open your MT4 or MT5 platform, find the proxy settings, and paste the host, port, username, and password from the portal. Select SOCKS5 where the platform offers it.

Libertex servers are hosted at Equinix LD4 (London). Select the TradersProxy node closest to LD4 for minimum latency.

Setup normally takes under five minutes.

1997

Founded

CySEC / FSA (Saint Vincent)

Regulator

MT4, MT5, Libertex Platform (proprietary)

Platforms

2 names

Server labels

In this guide

Broker notes

What matters before you connect

Libertex is a CySEC-regulated broker with roots dating to 1997, offering MT4, MT5, and a proprietary platform. Their server infrastructure connects through Equinix LD4 in London. TradersProxy works with Libertex's MT4 and MT5 connections. The proprietary Libertex platform does not use MT4 proxy settings.

The platform steps are the same across brokers. The server labels and datacenter location are what change. When the account portal and any public note disagree, trust the portal.

Setup steps

How to configure the platform

Copy the portal values into the platform proxy settings, save, restart if needed, then confirm the connection.

  1. Sign in to the TradersProxy portal and copy the host, port, username, and password exactly as shown.
  2. Open the proxy or connection settings in your platform.
  3. Select SOCKS5 as the protocol. Use HTTP only if the platform does not offer SOCKS5.
  4. Paste the portal values. Do not type them by hand.
  5. Save the settings, restart the platform if required, and test the connection.

Platform menu paths

MT4 and MT5: Tools → Options → Server tab.

cTrader: Settings → Advanced → Connection.

Other platforms: find the connection settings, choose a proxy type, and paste the portal values.

Server names

Server names and routing notes for Libertex

These are the server labels for Libertex. Use the one that matches your account type. If the broker portal shows a different label, trust the portal.

  • Libertex-Real
  • Libertex-Demo

Routing note

Libertex servers are hosted at Equinix LD4 (London). Select the TradersProxy node nearest to LD4 in your account settings for minimum round-trip latency.

Common mistakes

What usually goes wrong

  • Wrong protocol. Use SOCKS5 where available. Use HTTP only if the platform does not offer SOCKS5.
  • Typed credentials. Paste the values from the portal so the host, port, and password stay exact.
  • Wrong server label. Match the broker portal or welcome email, not an old screenshot.
  • No restart. Some platforms do not apply proxy changes until you quit and reopen them.
Questions

FAQ for Libertex traders

  • Libertex's MT4 and MT5 server infrastructure connects through Equinix LD4 in London. Traders in Eastern Europe and the Middle East are relatively close to LD4. Traders in Asia and Oceania benefit most from a TradersProxy node near LD4.

  • Yes. Libertex offers both MT4 and MT5 in addition to their proprietary platform. Configure each platform separately — proxy settings are not shared between MT4 and MT5 installations.

  • TradersProxy works with Libertex's MT4 and MT5 connections. The Libertex proprietary platform does not use MT4/MT5 proxy settings and is not covered by this guide.