Skip to main content
Broker setup guide - XTB

How to set up TradersProxy for XTB

This page covers the XTB-specific setup notes, the platform steps, and the server labels you are most likely to see. TradersProxy is broker-agnostic, so the connection logic is the same across brokers.

Use the broker portal for the exact server name. Use this page for the setup path and the routing notes.

Open portal Read the master setup guide

New here? See the plans

Quick answer

Open your MT4 or MT5 platform, find the proxy settings, and paste the host, port, username, and password from the portal. Select SOCKS5 where the platform offers it.

XTB servers are hosted at Equinix LD4 (London) / Warsaw. Select the TradersProxy node closest to LD4 for minimum latency.

Setup normally takes under five minutes.

2002

Founded

FCA (UK) / KNF (Poland) / CySEC / BaFin

Regulator

MT4, xStation 5 (proprietary)

Platforms

2 names

Server labels

In this guide

Broker notes

What matters before you connect

XTB is one of Europe's largest listed CFD brokers, founded in Poland in 2002. Their MT4 server infrastructure connects through Equinix LD4 in London for international clients. TradersProxy works with XTB's MT4 connection. XTB's proprietary xStation 5 platform does not use MT4 proxy settings — only MT4 accounts use the proxy path.

The platform steps are the same across brokers. The server labels and datacenter location are what change. When the account portal and any public note disagree, trust the portal.

Setup steps

How to configure the platform

Copy the portal values into the platform proxy settings, save, restart if needed, then confirm the connection.

  1. Sign in to the TradersProxy portal and copy the host, port, username, and password exactly as shown.
  2. Open the proxy or connection settings in your platform.
  3. Select SOCKS5 as the protocol. Use HTTP only if the platform does not offer SOCKS5.
  4. Paste the portal values. Do not type them by hand.
  5. Save the settings, restart the platform if required, and test the connection.

Platform menu paths

MT4 and MT5: Tools → Options → Server tab.

cTrader: Settings → Advanced → Connection.

Other platforms: find the connection settings, choose a proxy type, and paste the portal values.

Server names

Server names and routing notes for XTB

These are the server labels for XTB. Use the one that matches your account type. If the broker portal shows a different label, trust the portal.

  • XTB-Real
  • XTB-Demo

Routing note

XTB servers are hosted at Equinix LD4 (London) / Warsaw. Select the TradersProxy node nearest to LD4 in your account settings for minimum round-trip latency.

Common mistakes

What usually goes wrong

  • Wrong protocol. Use SOCKS5 where available. Use HTTP only if the platform does not offer SOCKS5.
  • Typed credentials. Paste the values from the portal so the host, port, and password stay exact.
  • Wrong server label. Match the broker portal or welcome email, not an old screenshot.
  • No restart. Some platforms do not apply proxy changes until you quit and reopen them.
Questions

FAQ for XTB traders

  • Yes. XTB offers MT4 access alongside their proprietary xStation 5 platform. TradersProxy works with XTB's MT4 connection. xStation 5 does not support external proxy configuration.

  • XTB's MT4 infrastructure connects through Equinix LD4 in London for European and international clients. Polish clients may be routed through local infrastructure — check your server hostname to confirm.

  • No. Being a publicly listed company does not affect proxy configuration. The MT4 proxy setup is identical to any other broker.